If I select this from the list (arrow next to it) and click the green tick, and then add the remaining info ie. Use the following it works, please report back the exact model name so that the next user can find it here on the forum.įirstly, the DB Power Camera is listed in the drop down list of cameras when you go to the ‘Network Camera’ tab !!! Nevertheless, if I set the camera to DB Power and then click the search button, you can see the camera listed as 192.168.1.51. If that do not work please give me the enact name and model of the cam and also a link to the cam. You can also test to search for the cam under the onvif tab. They usually tell that in the information of the cam. Start the easy way and see if the camera is onvif compliant. Since it is not listed you have to connect to the camera either using the tab ONVIF Source if the camera is ONVIF compliant or via Custom URL where you must know the enact URL, rtsp://xxx to connect. There are so many ip cameras on the market and the URL to the cameras are very different also within the same brand. I do not see that your camera DB Power IPCAMERA X Series is listed under the Network camera tab so that is probably why you will not get a connection. I am using Netcam Studio Server/Client (圆4) v1.3.6.8 and have a Licence for up to 16 Cameras. I have tried everything I know to try and get the camera connected without success. When I click ‘Test’ I get the error message “Video failed: The remote server returned an error: (404) Not Found”. I enter the correct Port number and the Authentication Username and Password. From the Camera Make I select DB Power and camera model - IPCamera. If I point(select) the DB Power camera IP address and click the green tick the Wizard fills in the IP address and RTSP (554). When I use the Netcam Studio Wizard and click the ‘Browse’ button, the DB Power camera is listed. I can access the DB Power camera via a browser when it is both wired via the LAN and also wirelessly. I have set up the DB Power camera exactly the same way as the others. I have just purchased a DB Power IPCAMERA X Series and I am trying to add this camera to my Netcam Studio console but without success. Some of these are wired via LAN cable and some are wireless. If you own a DBPOWER camera, which is not listed here, we can integrate them into the app.I have 6 existing Foscam IP Cameras set up on Netcam Studio and working with no problems. data usage for each camera, traffic overall and last session, display data rate per second.Import/Export, backup over iTunes File Sharing.switch on and off the network activity lamp or IR L E D (if supported).MultiView, watch 4 or 8 cameras simultaneously (4 = landscape, 8 = portrait), by scrolling you can see up to 96 cameras, tab on the camera to switch to control mode.mirror videoimage horizontally or vertically, for cameras hang headover.setup resolution, frames per second (fps), brightness and contrast.send snapshots to iphone camera roll or via email.turn the iPhone for fullscreen mode, with fully control ability.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |